2017 Honda CBR 1000RR SP2 Fireblade

Year: 2017

Make: Honda

Model: CBR 1000RR SP2 Fireblade

Engine Capacity: 1100cc

KMS: 0km

Rego: None

Unopened and Ready to grow in value. This cannot get any more unused.

The SP2 is a road legal homologation special using the Fireblade SP as a base – 141kW peak power, 114Nm torque, Marchesini wheels with optional HRC Sport Race or Full Race kits.

This limited-edition bike is designed for the most serious enthusiasts and professional racers. In addition to all the SP features, the SP2 uses a cylinder head with larger intake and exhaust valves, along with premium forged Marchesini wheels.

Visually the carbon pattern insets and gold striping interwoven into the HRC Tri- Color paint mark the CBR1000RR SP2’s difference over the “stock” machine and gold Marchesini wheels (reducing front/rear wheel inertia by 18/9%) are another clue. But the real differences –and what gives the CBR1000RR SP2 ultimate racing potential—lie inside the engine.

While the 76mm bore is identical to the SP, the CBR1000RR SP2 cylinder head runs 1mm larger 31.5mm diameter intake valves and 1.5mm larger 25.5mm diameter exhaust valves, with 10°/12° included intake valve/included exhaust valve angles (from 11°/11°). The valve pitches are identical, maintaining cylinder head width.

It runs the same 13.0:1 compression ratio but uses valve shapes and combustion chambers optimized for efficiency. Elongated spark plugs and a water jacket tightly wrapped around the combustion chambers improve cooling; this technology is derived directly from Honda’s RC213V MotoGP machine.

The pistons use an exclusive crown design with heat treatment that strengthens the area around the piston boss, which itself employs a 2.5mm shorter (and 8g lighter per cylinder) piston pin. Ready to house high-lift camshafts the outer diameter of the valve lifter has grown 2mm to 28mm, while total height and thickness have been reduced, saving weight.

Buyer pays stamp duty.